Blog
Technical writing
Pick a topic to see its posts, newest first.
Silicon Characterization
- Silicon characterization is not a PVT sweep: the physics behind process corners, mismatch, droop and temperature
Why no two dies behave the same: global process corners, local mismatch and SRAM Vmin, why SS fails setup first under IR droop, and temperature inversion. Explained for post-silicon validation and characterization interviews.
UARTUART basics and receiver design.
- The glitch that looks like a start bit: how UART RX FSMs reject false starts
How a UART receiver uses 16× oversampling, a mid-bit check, and majority voting to reject glitches on the RX line, plus the corner cases every validation engineer should test.
- UART – Universal Asynchronous Receiver Transmitter
An introduction to UART: what it is and how asynchronous serial communication works.
Cache MemoryA series that builds up from cache basics to write policies, write buffers, and SRAM vs DRAM.
- Why can’t we just increase cache size? And why SRAM, not DRAM?
Transistor count, wire delay, power, and why DRAM latency and refresh make it unsuitable as cache.
- Write buffer: the CPU’s performance assistant
How a write buffer hides memory write latency, when it fills up and stalls the CPU, and write coalescing.
- Why does DMA read a stale value of g_count?
Write-through vs write-back caches, dirty bits, and what happens when DMA reads memory before an eviction.
- A tiny cache collision can trigger a storm of evictions
Why two functions sharing one cache line thrash a direct-mapped cache, and how set-associative caches fix it.
- Cache Memory
Cache explained with a kitchen analogy: tag, index and offset, write buffers, and direct-mapped vs n-way set-associative caches.
Silicon ValidationLessons from the lab bench.
- Silicon vs simulation: where the truth lives
Why designs that pass every simulation still fail on first silicon, and what the bench reveals.
Embedded SystemsMicrocontrollers in practice, starting with what happens between reset and main().
- What happens inside the Reset_Handler during system startup?
Copying .data, clearing .bss, stack and VTOR setup, FPU, clocks, and C runtime init before main().
More on LinkedIn
I post regularly about silicon validation, embedded systems, and CPU internals.